Print PDF
Favorite
Email
Step 11Lining 2.0
Today Ahn and I scrounged around for some anti static bags for the new lining. We found 1 big bag and a bunch of the smaller chip bags. We decided to do a simple weave to make the most of our materials.
Take a look at these steps to include the woven lining:
1/2 of the black bag was enough for the central panel.
The rest we cut into strips for the side.
We had enough to cover the top, but to give a little more space to address the heat, we opted just to remove the padding on the top completely.
The case has been working out pretty nicely, but its nice to address that nagging feeling about the static. Ahn will test drive this some more and we'll report back if there are any more issues.
Hope to see more examples of what people can do with Trash!
Take a look at these steps to include the woven lining:
1/2 of the black bag was enough for the central panel.
The rest we cut into strips for the side.
We had enough to cover the top, but to give a little more space to address the heat, we opted just to remove the padding on the top completely.
The case has been working out pretty nicely, but its nice to address that nagging feeling about the static. Ahn will test drive this some more and we'll report back if there are any more issues.
Hope to see more examples of what people can do with Trash!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
