Step 5: Secure Edge Padding

First secure the bubble tape edge roll to the cardboard edge using some nails. The nails will poke holes for the fasteners as well as keep everything lined up and in place. We used three nails for the padding. Then 'sewing' with some wire, we fastened the padding to the cardboard. Make sure that the twisted connections are on the outside, so not to scratch up your laptop with sharp edges.

Repeat these steps for each of the 3 edges.
You could also use a pizza box and pad it to fit after wiping it down
No one will think that it is a laptop bag, but then again, some tidy soul may just throw your treasure away!
that is why i label my stuff<br>i'd probably label it IMPORTANT BOOKS!
Excellent! Kudos!!!
Clever Idea! Heck, as long as it looks like a package, you might as well address it to yourself :-) Perhaps if you leave it behind, some kind soul will drop it in the mail.
Just slide it in a FedEx Bag And... BAM just a package and you can smuggle your laptop into school
Wish i could think of this stuff! Great Work!
Great Project, I liked it so much that I made one for my macbook. For padding, I used the foam from a yoga mat and for the lining I took the padded bag that protects the macbook in the retail box and turned it inside out. It's slick and has no static.
Hi all, Thanks for the feedback. Yes, we realized afterward that the Tyvec would cause some worries. Thanks westfw -- your comment prompted a search on Google and I found some pretty worrisome stats on Tyvec and static. Everything has been working fine, but since a laptop is quite an expensive thing to fry, even a small chance of it gave us a really uneasy feeling. We spent some time today looking for a new lining and we just posted a redesign with a new lining made from anti-static bags. We'll continue to test drive things and report back if any issues arise.
I would be "slightly" worried about the lack of anti-static materials in your lining. (a laptop SHOULD be able to withstand a fair amount of static from outside.) But isn't it amazing the useful stuff that gets thrown out in high-tech society?
Hi westfw, We were worried about the static issue as well, which is why we added the paper lining to keep the plastic from rubbing against the computer too much. We’ve been test running it for a few weeks and so far things seem OK. Perhaps some tin foil could take care of that? Yes, there is a lot of stuff in the trash!
But FedX envelopes are usually Tyvec, a spun polyethylene "fabric" that is essentially made of plastic (the same plastic, more or less, as the bubblewrap.)
but he/she said they used a PAPER lining
You need to read past the introduction ;)<br/><br/>From step 7:<br/><strong>The FedEx envelope had a nice smooth texture that we thought would make a great lining. </strong><br/><hr/>I can build up a charge using a FedEx bag on my arm (hehe - I just tried :P). You'll probably be fine - it's just for that 1 in 1000 scenario that may cause problems. Something that could have been avoided with better materials selection :P<br/>
Hi, Thanks for the response and the tips. After some reading on the web, we got super worried about the Tyvec ... so yep we thought a redesign was in order. We found some anti-static bags and have added the updates. cheers!
I've never seen an anti-static laptop bag... I [b]really[/b] doubt it's an issue.
I doubt it's an issue either. I believe that laptop bags pay SOME attention to anti-static issues, though I don't know how much. My concern was that non-anti-static bubble wrap and tyvek envelopes might be particularly prone to static buildup. It's a good instructable. Next step: add all those little extra compartments that tend to be useful in laptop bags. I haven't gotten a new laptop bag in quite a while, but I don't think I've seen one with compartments sized for USB drives or other flash media...
If you've never seen it - that means that it's doing its job well ;) I'd think the purpose is not so much to prevent outside static - but instead to prevent build up while sliding in/out and slight motion while in transit.

About This Instructable


21 favorites


More by ITP_Sustainability: Undercover Laptop Case
Add instructable to: