Introduction: Understanding a Janome Embroidery Machine: Setting Fabric in the Hoop and Attaching the Hoop to the Machine
Written by Eva Marie Cooper
I did this at TechShop San Jose!
The hoop size I am using is a 140mm X 200mm [5.5” X 7.8”].
This is a photo instructional on how to set fabric in the hoop of a Janome Embroidery machine and how to attach the hoop to the embroidery machine. This is a fairly simple procedure and should be pretty easy to figure out! If you have any questions or comments feel free to leave a message below!
Link to Other Instructable:
Understanding a Janome Embroidery Machine: Threading the Machine and the Needle