Introduction: Unicorn Head Papercraft

Picture of Unicorn Head Papercraft

This is a unicorn head papercraft . The Idea comes form an amazing instructable create-faceted-paper-objects .At its comments, there are some unicorn papercraft pictures made by user. Some user want to get the pdf file.

I find the model on website : http://www.thingiverse.com/thing:750360 and check that the model by owner is licensed under the Creative Commons - Attribution - Non-Commercial license. It is free to share.

So I followed the krummrey's instructable to make this unicorn head papercraft . Just download attached pdf file and follow the steps. It will take a few hours. If you are new to papercraft, I linked a tutorial below that should be helpful. Enjoy!

Step 1: Materials and Printing

  • A printer
  • A4 or A3 Paper (7 sheets)
  • Scissors
  • Glue
  • Ruler (optional)

I used A4 paper sheets to make this deer head but you can use A3 paper.With A4 paper the deer head should be approximately 35 cm high .With A3 paper, it is approximately 52 cm high.

When printing on paper make sure you have fairly heavy paper. 180 g/m^2 is the minimum to make a 35cm high one. If to make 52cm' s one, try to get paper closer to 250 g/m^2 .

In the pdf file, the horn and ears parts is grouped on the last one page , If you plan to use different colors.I also kept the base on a single page.

As for the glue I guess everyone has their own favourite. I prefer double-sided tape because It's cleaner (no spillage) and faster.

Of course you also need a pair of scissors and optionally a ruler for folding. I used a laser cutter to make parts , it really save times.

Step 2: Making the Unicorn Head

Picture of Making the Unicorn Head

If you have never done any papercraft, have a look at a tutorial first. I am not going into the basics here. This tutorial by krummrey looks very nice.

First cut out all pieces along the black, solid lines. Then fold at the dotted lines. Placing a ruler on the line can help to get straighter folds faster.

Remember: the printed side (lines and numbers) should end up on the inside of the model, so you can't see anything on the deer head form outside. Therefore most folds in this model will be valley folds!

I advise you to start with the ears, then horn, and then head. When you make head, start with the mouth‘s parts. For easy to put on the wall and to maintain shape, I recommend draw the base to a cardboard and cut them off.

Step 3: Thanks

Picture of Thanks

I hope you like my papercraft project. If you make it, I would be glad if you shared a picture in the comments. I would also love to see different color combinations. If you find any bugs in the template please also let me know so I can fix them.

I would like to extend my most sincere thanks and apologies to DrDee17. His work Papercraft-Low-Poly-Bird is very impressive. I copied some text from his tutorial. Thanks for the excellent work of DrDee17.

I need to thank krummrey for his great tutorial on making papercraft objects, and the picture in the step is made by krummrey, it is very good.

Also I want to thank Thingiverse user 'Apachcreation' for his unicorn head model that I used in the process.

Hope you have fun making this.

Comments

JulioM109 made it! (author)2017-05-16

Was looking for unicorn decorations when I came across this 3d head and I challenge myself to do it. So, I did it and I'm really proud of the result. Thanks for sharing it!!

Alegriasmuebles (author)2017-04-14

Can you send the PDF to me
Pelase? Alegriasmuebles@gmail.com
Tks

wakkho (author)2017-04-03

I WANT PDF THADASHI@ICLOUD,COM THANK YOU

rafar8 (author)2017-03-20

Hey, can I get a copy of this template?
My email is rreyna.cruz@gmail.com
I'd really appreciate it.
Thanks!

papaours81 (author)2017-03-17

Hello, can you send me the pdf to my daughter?

Thank you : antoine.perron.81@gmail.com

jgroff710 (author)2017-03-06

I want to give one to my teacher at school, pleeeeeeeesecsent!!!!

jgroff710 (author)2017-03-03

Can you send it to me? jensongroff@gmail.com and jgroff710@millardps.org

topenanta (author)2017-02-26

Hello,

Can you please send me the pdf at bebesun@wp.pl

Thanks a lot

agatakowalczyk (author)2017-02-24

Hello:-)

Can you please send me the pdf at agatakowalczyk80@gmail.com

PratyushK13 (author)2017-02-22

Great Work!!!

Can you please send me the pdf at pratyush.k22@gmail.com

spily made it! (author)2017-02-21

Great! Thanks!

However I am looking for an hippo head since several months? Is someone could help me? Thanks a lot for your sharing! :-D

SHAKA2087 (author)2017-02-06

HOLA ME GUSTARIA EL ARCHIVO PDF por favor?

Jorge.gd1092@gmail.com

FazekasE (author)2017-02-06

can you share the PDF file with me, please?

feszter94@freemail.hu

_airotciiv (author)2017-02-06

can you plaese share with me the PDF printable templates, thank you so much. ->> dimitrova.victoria@abv.bg

Anna Lova (author)2017-02-01

Привет! Будет ли это возможно для Вас, чтобы отправить мне PDF, пожалуйста? Спасибо заранее !
Annakamilova@gmail.com

Gwennite (author)2017-02-01

Hello Boardattack,

A friend of mine is moving soon. She is a big unicorn fan so I would like to make it for her.

Can you please send me the PDF please? ga.torcheux@toulouse-bs.org

Have a lovely day.

Gwennite

aumarlewhihi (author)2017-01-30

Can you share the PDF file with me, please ?

aumaumpk@hotmail.co.th
Thanks

ToñoM2 made it! (author)2016-12-28

Thank you! it was very easy and quick to ensamble it, in 2 hours it was ready!

luis in grey (author)ToñoM22017-01-29

hi,could you please send me the pdf?

luisdgutierrezc@gmail.com

thank u!

AngieA39 (author)ToñoM22017-01-02

podrias compartir el PDF????
Please!

angieangel1994.aa@gmail.com

DiogoR17 (author)AngieA392017-01-16

podrias compartir el PDF????

Please!

dico09@gmail.com

DiogoR17 (author)ToñoM22017-01-16

podrias compartir el PDF????

Please!

dico09@gmail.com

luis in grey (author)2017-01-29

hi,could you please send me the pdf?

luisdgutierrezc@gmail.com

thank u!

Eliimiira (author)2017-01-23

Can you share the pdf file with me?
Shamshiri.eli@gmail.com
Thanks

IlyaS17 made it! (author)2016-12-24

Thank you!

DiogoR17 (author)IlyaS172017-01-16

Can you share the pdf file with me?

Please! :)
dico09@gmail.com

MishIsMozh (author)2016-10-18

Thaks a lot! When I finish it, I'll send you my picture. :)

Xuan83 (author)MishIsMozh2016-11-02

Hi. Can you share the PDF file with me, please ?
Jenny_van@hotmail.com
Thanks

MishIsMozh (author)Xuan832016-11-06

The pdf is already in the instructions, check it out :)

xuxux (author)MishIsMozh2016-11-14

it is probably, however it is only for a premium accounts. Do you mind sharing with me xehiaa@yahoo.com,Thanks in advance.

MishIsMozh (author)xuxux2016-11-22

Nope, I'm not premium and I did it, just search for it

ĐucP2 (author)MishIsMozh2017-01-11

can you send me the file please? pda810@gmail.com

DianaF47 (author)MishIsMozh2016-12-26

Love it

VanessaC92 (author)MishIsMozh2016-12-07

Hey, may u send to me the PDF? My download is going wrong. Pls!!

vpc.vanessacosta@gmail.com

Arturov19 (author)MishIsMozh2016-11-28

hola, me puedes pasar las plantillas de unicornio? arturovcomas@gmail.com

JosefineR (author)2017-01-07

Which way do I fold the green lines on the pdf? If I have the numbers towards me?

MosieurJ made it! (author)2016-12-18

Thanks a lot! https://www.instagram.com/p/BOKJbeOAd-V/

IlyaS17 (author)2016-12-05

For those who can't find PDF on Step 3 page.

https://www.instructables.com/ORIG/FME/3C96/IPCUF6C...

Thanks to author. I plan to make this head as a present, too.

VanessaC92 (author)IlyaS172016-12-07

THANKSSSS

Arturov19 (author)2016-11-24

hola podrias compartir las plantillas esta demasiado caro comprarlos arturovcomas@gmail.com

MiguelP48 (author)2016-11-22

Please is for a gift, thanks ;)

elo87miguel@hotmail.com

ArmandoV24 (author)2016-11-20

How did you hit it or put it on the wall?

ArmandoV24 (author)2016-11-20

COMO LO PEGASTE ALA PARED ?

GitteV (author)2016-11-19

Cool, can you share pdf with me? steentjevandergit@hotmail.com

AgataJ1 (author)2016-11-19

please, can you share pdf with me, download option is available only for premium users (and honestly price is really too high for me) additionally I'm located in France. This unicorn head would be a dream for my 3 princesses.

tirtha79@op.pl

Thank you

MiguelP48 (author)2016-11-15

Hello! could you send me the pdf??

elo87miguel@hotmail.com Thanks ;)

PioloG (author)2016-11-14

can you share pdf with me,please??

paul.garanzini@gmail.com

marin11302 (author)2016-11-14

This is look amaizing !! Could you share the pdf ? marinebrunel@hotmail.fr !

Thanks a lot :)

maddu veiga (author)2016-11-11

can you share pdf with me,please??

madduhhh@gmail.com

MichelleR187 (author)2016-11-06

please, can you share the pdf with me?

rosa-michelle@outlook.com

About This Instructable

46,699views

106favorites

License:

Add instructable to: