Introduction: Unique 5 Minute Paintball Caddy
Step 1: Supplies
what you will need:
1. Empty tide cold water bottle
2. Kitty litter bottle / container
tools you will need:
1. Exacto knife
2. Needle noes pliers (or pliers that you prefer)
3. Dremel (optional to replace knife)
Step 2: Removing and Preping the Neck
cut the bottle to extract the neck after the cuts have been made you should have something that looks like image 4.
Step 3: Preping the Cat Littler Bottle.
There's nothing to really do other then just remove the plastic foil around it and spray painting it. (optional)
Step 4: Join the Two Parts
Basically just snap the two parts together.
Reason for not gluing them together is that you need to remove the neck from the bottle to refill with paintballs. The neck just acts as a cap and assists to feet balls into pods without spilling them.
Step 5: Thats About It.
Just add the tide cap to prevent any debree from getting it also prevents balls from coming out if the caddy falls over.
after you have assembled , you may want to paint it.
We have a be nice policy.
Please be positive and constructive.