# Unit Origami

This is a really sweet type of origami that doesn't require the intricate folding that nobody can understand.

What you'll need:
12 sheets of origami paper

Remove these ads by Signing Up

## Step 1: Building

Now the first step making this type of origami is to make the first unit!

1. Start with a single piece of origami paper with the color side facing down and fold it in half.

2. Next, unfold that. Then bring up the paper edge to the crease just you made in step 1 and fold that down.

3. Rotate the paper 180 degrees and repeat step 2 with the paper edge.

4. Rotate that by 90 degrees so you're looking at something like a cupboard. Open the left side door of "the cabinet" and fold up the bottom right corner up to the crease of the opened left side.

5. Undo the right triangle you made in step 4 and close up the left side of the cabinet.

6. Then rotate this by 180 degrees and open up the new left side. Then repeat step four by folding up the right hand bottom corner up to the crease of the left door to the cabinet.

7. Now instead of undoing this fold as you did before, you want to simply close up the left door of the cabinet with the right triangle still folded up inside of it.

8. Now this is probable one of the hardest steps in making this type of origami so bear with me :)   Start out by lifting up the top right hand corner's "door" as far as it will go without undoing the folds. Then take the whole top left hand corner and tuck it underneath the right top flap. You want to keep pushing it in until it forms a triangle, the same as the one perpendicular to it.

9. Now take the whole shape flip it upside down and proceed to fold the white corners down over the shape for form a parallelogram without any white showing on either side.

10. Fold up the 2 points of the shape to form a square.

11. Lastly you just want to fold the square diagonally in half, along the gap between the two points you folded down in step 10. You may fold them in either direction.

That wasn't to hard now was it? Now all you got to do is go make 11 more of these :D

 1-40 of 70 Next »
It does require irritating folds that I can't understand. HELP!!!
spark16 says: 2 years ago
EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
IT'S SO AWESOME!
spark16 says: 2 years ago
omg it is so simple!
oh yeah, the video was a WHOLE LOT BETTER than the written instructions.
but
and omg mine turned out SO AWEMAZING!(THAT'S A CROSS BETWEEN AWESOME AND AMAZING)
jbend says: 2 years ago
this is soooooo easy
logghi says: 4 years ago
i cant get the pyramids together... help!
kaylaangelkisses in reply to logghi2 years ago
Me nether!
Buzzsushi in reply to logghi3 years ago
It takes A LOT of wiggling and bending lol.
logghi in reply to Buzzsushi3 years ago
I managed it about a week after posting that comment, but it looks great thanks!
mary96 says: 2 years ago
can someone plz tell me how to make the 90 unit one//
bubblebut says: 2 years ago
I did it and it looked awesome it is so cool thanks for making it mine looks like this.
live it,laugh it,love it in reply to bubblebut2 years ago
dude i have no clue how to do this!!!!!!!!!!!!!!!!!!!!!
PetBennett in reply to live it,laugh it,love it2 years ago
It may take sum practice with other origami folding before or in my case, an epiphany cuz I'm weird like that. Trying the lazy tertrahedragsomething at http://www.origami-resource-center.com/modular.html is a good place to start :3
bubblebut in reply to PetBennett2 years ago
dude if you want to start off with easy origami then ckeck out my page or go to http://www.origami-fun.com/index.html
bubblebut in reply to live it,laugh it,love it2 years ago
o come on its easy
Applebohn (author) in reply to bubblebut2 years ago
that's awesome :D Looks great!
christophungus says: 2 years ago
Awesome!!!!!! I made a Giant one out of big construction paper!!!!!!!!!!
Applebohn (author) in reply to christophungus2 years ago
that's epic!!!!
christophungus says: 2 years ago
Nice instructable!!
2 years ago
cccccccccccccooooooooooooollllllllllllllll
mutant763 says: 3 years ago
Really nice, could you do a video showing how to put one of the larger versions together with 30 modules
pholt says: 3 years ago
How do you put the units together?
eaglehylian says: 3 years ago
it´s easy... but so awsome.. thank´s
Phantomn says: 3 years ago
Just made one and haven't stopped fiddling with it xD
Nice 'ible.
imcharly says: 3 years ago
The Gray Ninja says: 3 years ago
i followed your guide and i have to say it was very cool when i experimented! I had somehow managed to make a cube out of six units that holds up pretty well! thanks a lot!
Buzzsushi says: 3 years ago
Already made 3 different things and working on a 90 unit thing. its gonna rock, will post pics when Im finished. Great ible!
Applebohn (author) in reply to Buzzsushi3 years ago
Awsome, it sounds great!!! kinda adicting isn't it :-D  thanks
Buzzsushi in reply to Applebohn3 years ago
Yeah. It is. Lol. Halfway done making the units nao. its gonna be big.
rock_JOCKY says: 3 years ago
ur right, it does confuse ur friends. when my bud showed me his, i couldnt figure out how he did it. now i do so thx
origamianything says: 4 years ago
... has ANYONE thought about the *cough* other *cough* 12 unit and the (lol) 60 unit sonobes? and everything inbetween? and also the 270 unit....
I made a 120 (? maybe it was just 90) piece '-hedron' back in the mid 90's. A few years later we moved overseas, and I lost track of it. Now we're back in the ISA and I would sure like to make another one to show my math students! Anyone out there who can help??
WHAT? A 120 UNIT??? i just made one of those, but slightly modified. make rings of 10 units, like ur making a stellated icosahedron. but you push the center down, that makes a star. make 12 of those, and connect those together like a dodecahedron.
kog103 says: 4 years ago
Thanks for that man! Good instructions, and a brilliant result! Thanks!
jibas_music77 says: 4 years ago
I did it! Thanks for the video XD
nam.keeheon says: 4 years ago
What is the real name to this origami? (like polyhedra)
paperairplanecreator in reply to nam.keeheon4 years ago
i think its called a hexaflex
Applebohn (author) in reply to nam.keeheon4 years ago
I don't know
nam.keeheon in reply to Applebohn4 years ago
thanks though, it turned out really cool, It be cooler if I knew a name...
Applebohn (author) in reply to nam.keeheon4 years ago
i just looked it up and i beleive it is a stellated octahedron
nam.keeheon in reply to Applebohn4 years ago
sweet, thanks dude
 1-40 of 70 Next »