Introduction: Universal Binderclip Stand

Picture of Universal Binderclip Stand

This simple yet innovative binderclip stand works for anything!
Dont forget to subscribe to my youtube channel
www.youtube.com/halonerd33/

Step 1: Items

Picture of Items

Of course you need 2 binder clips. The normal ones work fine but if you really have like a psp or something use a jumbo binderclip

Step 2:

Picture of

Position binderclip #1 as shown in picture

Step 3:

Picture of

Position binderclip #2 as shown in picture

Step 4:

Picture of

Connect binderclips 1 and 2 as so you should hear a click in binderclip one as you pull the silver part out.

Step 5:

Picture of

The last step is to pull binderclip 2 back if you want you can pull the silver part down so it wont cover the screen of whatever you are putting on it. That also helps support the stand. (refer to intro for how to postition silver part)

Comments

sjoobbani (author)2010-11-24

Very nice! maybe add some duct tape or something soft & grippy on the edges.

Weissensteinburg (author)2010-02-21

 How about a photo of it in use?

About This Instructable

2,413views

6favorites

License:

Bio: I'm just a guy starting to make cool instructables
More by Halonerd33:Universal Binderclip Stand
Add instructable to: