Universal IR Remote Power Switch for PC

Step 5 Drill Hole for the IR Detector

Started with 1/8" drill, then 1/4", then 3/8". Stepping up the drill bit sizes makes for a hole with a smooth edge. I left the 3.5" plate in the main faceplate while drilling so that the part would be easier to hold steady. Be cautious and safe when drilling anything, especially small parts with relatively large bits.

Comments

[limwel23]

if we turn off the computer, is the shutdown mode will appear or not?

[TimHepner]

This switch can be used to shut down the PC just as if you had pressed the front panel switch.