Instructables

Universal (theft) protection for electronic equipment or cars with invisible switch

Featured
Picture of Universal (theft) protection for electronic equipment or cars with invisible switch
I'll show how you can utilize a reed switch as a universal protection for electronic equipment or cars. All you need is a reed switch and a magnet. For cars you'll need a power relay to increase the switching capacity of the reed switch.

A pictorial and a video demonstrates how to build an invisible switch into a PC. A schematic is shown how to apply this technique for cars.


 
Remove these adsRemove these ads by Signing Up

Step 1: How to make an invisible switch in a PC step 1

Picture of How to make an invisible switch in a PC step 1
1 whole pc.JPG
2 front retainers.JPG
I'll show how to protect a PC with a hidden switch. You'll be the only one who can turn it on and thieves will not directly be able to turn it on unless they take your pc apart and start 'fixing' it.

The first picture shows the reed switch which we will use. It's a glass tube with two contacts which are pulled towards each other making contact when a magnetic field is present. You can reed(read ;-) ) more details on wikipedia. http://en.wikipedia.org/wiki/Reed_switch

For the PC we'll use a read switch with a make contact.

The first step is to remove both side pannels from the pc housing by unscrewing the bolts shown in the picture. After that the front panel can be removed by pushing the front panel retainers together with your fingers to unlock them.

Step 2: How to make an invisible switch in a PC step 2

Picture of How to make an invisible switch in a PC step 2
5 twist on switch.JPG
6 tape to front.JPG
Now that the front panel is removed, search for the wires coming from the on/off button. In my case, I had to check that I wasn't confusing them with the led wires. Once you've found the wires from the on/off button, cut one of the wires and strip both ends over a length of 10mm. You can see this in the second pictures.

Now we can twist our read switch to the wires. Once the switch is twisted on, we can tape it to the front panel using some quality tape, so it won't let go. Mount the reed switch on a place where the front panel is not very thick, otherwise we may not be able to operate the switch.
1-40 of 68Next »
jtechian3 months ago

Mount the magnet in the mouse so you don't use it and bypass the pc switch altogether to simply turn on your pc with the mouse. Not likely to loose the mouse and if you do, you bigger problems :) Good Instructable btw!

jtechian jtechian3 months ago

* so you don't (loose) it

daemonkrog6 years ago
So you're putting a magnet.. by your hard drives...
Hard drives have two extremely powerful magnets inside them.
WAY, WAY more powerful than the magnet in this instructible.
No one is ever concerned about getting their hard drives too close
to other magnetically sensitive materials.

Your concern is good, but flawed :-)
the magnet needed is no where near strong enough to damage the hard drives. Hard drives have surpassed the time now that near by magnetic waves damage them. Unless those of a very strong power
Useful information. I was pretty skeptical about that answer.. but you're right. I stand corrected.
http://www.pcworld.com/article/116572/busting_the_biggest_pc_myths.html
Ha ha ha Exactly! Not so smart.
animal03074 years ago
Very impressive. I like the idea. But I have a small suggestion to make. Forget the switch at all and just put in the reed switch. You could mystify your friends by just waving your hand over your computer case, (with a magnet concealed with a bit of slight of hand) and like magic it turns on. You are now a true master of technology.
nolte9194 years ago
Your video was removed by Metacafe.  I don't suppose you'd make it available again.
R3N34 years ago
very nice. will use.
you could also mount a magnet in the table under the PC and the reed switch in the bottom of the PC, so it sits just above the magnet then hook the reed switch to an alarm in such a way so that if the PC is picked up or moved slightly it would sound an alarm. That is another theft prevention device.
I've been looking all over online and I can't seem to find reed switches, and the local Radio Shack, Circuit City, Best Buy, Hobby Lobby, Fry's Electronics, and (of course) Wal*Mart ALL yielded nothing. Anybody got a suggestion?
I got some cheap door alarms from Dollarama, they have a reed switch in the sounder side.
1 word ebay, I bought 20 reed switches for 5 bucks.
Mouser is where I go for most of my discrete components.
Here is the link to the page in there catalog for reed switches.
The bottom ones are truly tiny little things.
reed switches
That's really cool! One question though, you can remove the magnet after you push the button and turn on the computer, right?
Yes, unless you have a computer that only stays on if you keep the button pressed.
But wouldn't that also prevent the computer from being turned off? (Of course there stil is the OS shutdown/power off, but if you somehow disabled that.... :-) )
apburner biojae6 years ago
If you make the switch again it will cause the PC to go into shutdown. If you make it for 5 seconds the power supply will shutdown without the help of the PC
I don't think there are any/many computers that require the user to keep their finger on the power button during use :P Those that stay clicked in once pressed until pressed again would work fine with the reed switch. It would just be slightly irritating if you lost the magnet.
my 286 required that cause it was so old, then the screen broke a few years ago and i could play Street Rod 2 anymore :-(
Then you just look for another one:) because reed switches are not bound to one magnet only. Perhaps if you take a stronger magnet you can keep the magnet on a bigger distance, but I guess that's the only difference.
No, I meant more if you couldn't find a magnet, but whatever. I don't keep that many lying around. I think it would be a more efficient and pragmatic system if you made the magnet an integral part of the computer's tower/whatever. Then if you're going away or something, you can remove the magnet and it won't turn on :)
Then you go to the back and unplug it =]
I wasn't sure whether it was a non momentary switch or not.
The button on a PC is a momentary switch, but it's the motherboard that keeps the PC turned on when it's pressed.
hanzablast (author)  Weissensteinburg6 years ago
Yes, indeed, it's not really clear from the video, but yes you can take it off. I think I also wrote it in the pictorial somewhere.
craftsman6 years ago
i lose stuff alot and am afraid of losing the magnet are there any other switches that might be like this like a finger sensor?
lux4x46 years ago
Very good ..i use it about 20 years!!!!!! in my cars i use a step-step switch, so i use the reed switch only for a second to pulse a + ! It works from 20 years!!
Cool, however harddrives + magnets is not the best combination.
a hd is shielded which means covered with metal and there are huge magnets in a hd
Not all HDs are shielded and an external magnetic field would disturb the magnetic fields created by the magnets inside the HD. However this doesn't happen every time.
wesie426 years ago
if i am correct, as soon as you take your magnet off, the computer will turn off
Rob K wesie426 years ago
Nope power buttons on computers are momentary, Hanzablast could have just used the reed switch to turn it on,
dkfa wesie426 years ago
yea?? wont it turn off like wesie said?
....wow... just wow.... NO it WONT turn it off. I wont even bother explaining why. Just live with it.
No, it won't. That wire isn't nearly big enough to provide the power to run the PC, just the switch to turn it on.
daemonkrog6 years ago
problem is.. this wont protect your data at all, nor your pc from being stolen. More of a keep my friends and family from being able to turn my pc on type thing.
casey321b6 years ago
try doing the same thing but with your mouse too. that would be super cool!!!
find a way to mount that magnet in your finger
1-40 of 68Next »