Introduction: Upcycled Torchlight

Picture of Upcycled Torchlight

An interesting and creative way for you to upcycled used water bottle!

Step 1: Cut the Plastic Bottle Into 3 Parts

Picture of Cut the Plastic Bottle Into 3 Parts

Step 2: Take the Middle Part and Cut Out a Rectangle So That the Part Can Wrap Around the Plastic Cap Nicely

Picture of Take the Middle Part and Cut Out a Rectangle So That the Part Can Wrap Around the Plastic Cap Nicely

Step 3: Cut Out a Rectangular Hole in the Middle Part to Put the Switch In.

Picture of Cut Out a Rectangular Hole in the Middle Part to Put the Switch In.

Step 4: Glue the Back of the Switch Using a Hot Glue Gun to Secure It in Place.

Picture of Glue the Back of the Switch Using a Hot Glue Gun to Secure It in Place.

Step 5: Take the Top Part of the Plastic Bottle and Unscrew the Cap.

Picture of Take the Top Part of the Plastic Bottle and Unscrew the Cap.

Step 6: Take the Cap and Poke 2 Holes on the Inside Part to Fit the LED’s Wires Through the Cap.

Picture of Take the Cap and Poke 2 Holes on the Inside Part to Fit the LED’s Wires Through the Cap.

Step 7: Completing the Circuit

Picture of Completing the Circuit

Step 8: Hot Glue Everything to Ensure It’s Intact

Picture of Hot Glue Everything to Ensure It’s Intact

Step 9: Install the Reflector

Comments

3366carlos (author)2017-12-22

wow

Deadeyeo86 (author)2017-12-22

WHERE DO WE FIND THE 3.7 V LED??? I LIKE THE IDEA

About This Instructable

449views

6favorites

License:

Bio: ME.REKA is an innovative and alternative education collective, created to challenge the limits of 21st century designing and making. Through ME.REKA, people come ... More »
More by MEREKA:Upcycled TorchlightTerrarium
Add instructable to: