Instructables
Picture of Upcycled Vinyl Record Earbud Wrap
IMG_4658.JPG
IMG_4660.JPG
IMG_4675.JPG
IMG_4670.JPG

 


Step 1:

Picture of
- Cut out the inside of your vinyl record using a band saw.
- Sand the outside of the record until it's smooth.
- Return to the saw and cut out small square shaped notches on the top and the bottom of the record.
- Cut out larger circular notches on both sides of one of the smaller squares.

Step 2:



-Now you can wrap your earbuds around your very own earbud wrap! The video below demonstrates this.



How to Wrap Up-cycled Vinyl Record Earbud Wrap from Trim on Vimeo.


 
Remove these adsRemove these ads by Signing Up
Sweet! I gotta make something like this. My earbuds are always getting tangled up in my pocket.