With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Turn this cool looking toilet plunger into a modern looking lamp.
You will need a toilet plunger, this one also twists open. Lamp cord, lamp socket, and a zip tie (not in the picture) and a dremel with a small drill ...
Drill a small hole in the center on top of the pluger.
Unscrew plunger and insert lamp cord through the hole ontop of plunger. Pull the cord till it is at least 2" out of the top of plunger and inside the ...
Place plunger on table and unscrew base. Place bottom half next to lamp cord to see where the socket will fit inside bottom half of plunger. Make 2 ho...
Thread lamp cord through plunger. lamp cord has a smooth wire which should connect to golden screw on socket and other wire connects to the other scre...
Drill 4 small holes in the top of the bottom half of plunger above the socket (just to be on safe side.)
Pull lamp cord up through plunger till the hole in the lamp cord is next to the hole in the middle of the plunger. Thread zip tie through and pull sec...
Hang your new light and plug in.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »