Step 7: Reconnect blades to connectors, and connectors to motor
Wait overnight for everything to dry and then put the fan blades and connectors back together -- reverse what you did in steps 3 and 2. Be careful when handling the connectors because the paint can scratch off pretty easily. Not really a problem later since you will probably never touch the connectors, or if you do it will be with a soft cloth when cleaning.
My fans have two rows of screw holes so that I can choose to use four blades (inner row of holes) or five blades (outer row of holes). I went with four to minimize the fan even more. With the nice white paint you can hardly see the fan when it's on.
My fans have two rows of screw holes so that I can choose to use four blades (inner row of holes) or five blades (outer row of holes). I went with four to minimize the fan even more. With the nice white paint you can hardly see the fan when it's on.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
