Print PDF
Favorite
Email
Step 4Unscrew The Top
There are two screws holding the guts in the player, they need to come off.
Move the power switch to the "Hold" position, and Insert the flat-head screwdriver tip under the lip of the plastic cover, in the opposite corner of the power-switch hole (see pictures). Gently pry the coverplate off to expose the two tiny screws. Use the phillips head screwdriver to remove the screws. Both of them.
I put the screw into the CF card case so I wouldn't lose them. If I had a nickel for every screw I lost by forgetting to put them somewhere safe.... Soda bottle caps work well, too as long as they're clean.
Move the power switch to the "Hold" position, and Insert the flat-head screwdriver tip under the lip of the plastic cover, in the opposite corner of the power-switch hole (see pictures). Gently pry the coverplate off to expose the two tiny screws. Use the phillips head screwdriver to remove the screws. Both of them.
I put the screw into the CF card case so I wouldn't lose them. If I had a nickel for every screw I lost by forgetting to put them somewhere safe.... Soda bottle caps work well, too as long as they're clean.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
