Step 8: Reassemble The Router
At this point you've really got two options:
- If you're sure that the RAM will work, then continue on with this step and reassemble the router.
- If you're not sure and would like to test it before getting the router all reassembled again, then skip to step 9 and come back here once you know the upgrade worked.
Do the reverse of the first few steps :)
Take the case, set it back on the router making sure that all the parts that look like they should be out are out and look like they should be in are in. Make sure to set it on a bit back from 'in place' so that you can slide it into place.
Once you've got the case on the router, slide it back on tight, then replace all the screws you removed.
- If you're sure that the RAM will work, then continue on with this step and reassemble the router.
- If you're not sure and would like to test it before getting the router all reassembled again, then skip to step 9 and come back here once you know the upgrade worked.
Do the reverse of the first few steps :)
Take the case, set it back on the router making sure that all the parts that look like they should be out are out and look like they should be in are in. Make sure to set it on a bit back from 'in place' so that you can slide it into place.
Once you've got the case on the router, slide it back on tight, then replace all the screws you removed.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
