Print PDF
Favorite
Email
Step 6Format the hard drive
1. Turn on your Xbox 360
2. Go to "Console Settings" and then "System Info"
3. Write down the serial number
4. Go to "Memory" and format the drive (if it says a drive is not detected, you did something wrong... back to the beginning.)
5. Enter the serial number you wrote down in step 3
It's going to take a while to format the drive. Leave it while we backup the files on the old hard drive.
I apologize. The picture is of the old blade menu.
2. Go to "Console Settings" and then "System Info"
3. Write down the serial number
4. Go to "Memory" and format the drive (if it says a drive is not detected, you did something wrong... back to the beginning.)
5. Enter the serial number you wrote down in step 3
It's going to take a while to format the drive. Leave it while we backup the files on the old hard drive.
I apologize. The picture is of the old blade menu.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Jun 18, 2009. 10:24 AMWorm4Life
says:
I thought this meant step 3 over all, not step 3 of step 6 :(
Reply
 |
Add Comment
|
