Step 6: Final assembly
For the final assembly, I clamped the front piece to the side braces and sunk the screws.
Next I flipped it over and attached the back piece.
Lastly, I turned the planter upside down and attached the bottom. I did decide here that I should add a screw through the front and back side into the bottom piece for added strength.
Once assembled, I predrilled the holes to mount it to my fence.
Next I flipped it over and attached the back piece.
Lastly, I turned the planter upside down and attached the bottom. I did decide here that I should add a screw through the front and back side into the bottom piece for added strength.
Once assembled, I predrilled the holes to mount it to my fence.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
