iImage Information

This is an easy instructable...how to make a billfold out of cardboard.
Step 1Tools And Materials I Used
iImage Information

One piece of thin cardboard. Then I used scissors for cutting the paper needed, glue of course, clamps to hold while gluing, paint brushes, and finally, some high gloss polyurethane varnish, water based. For the driver's license compartment, I used a piece of plastic,3 and 7/8ths by 2 and 7/8ths in.
For the edging "leather" I used kraft paper, cut to 3/4in in width. Interior compartments are made of a heavy cardstock.
=))