Use your Mac OSX as a Wirelss Adapter for your XBOX 360

Step 3: Now

Your router should have an IP Address, and it is usually 192.168.1.1, check on the bottom of the router to make sure. There should also be a username and password down there too, remember these things. Now go to your internet browser and enter in your router's IP Address in the navigation bar, it will ask you to give a username and password, does this sound familiar? Once you do that, you should go to "Status" on this web page and write down what your IP Address is. Every single one is unique.

Comments

[ghooey2]

 mine arent on the bottom of the router and ive tried admin but it doesnt work, help?

[Riezerdom]

You really don't need this step if you know your router's password and information all ready.

[tman125]

i am confused about what to do for step 5. i dont know where to find that screen.

[the33dude33]

I guess you're on the New Xbox experience. Go to the "My Xbox" section and all the way on the right there's system settings. I'm sure you can find your way around from there. Good luck!

[ianapoc]

okay, so i'm stuck on the part where i have to go to the router host site. my router ip is the normal, but when i type it in on my browser, i get page load error.

[Cpt Culpepper]

I looked under my router but it didn't have an IP address or a username and password it had a mac address however

[chrisswiss83]

Might want to check the manufacturer's website if 192.168.1.1 doesn't work. Found out mind was ever so slightly different.

[bsblade]

thanks for that adding that advice.

[bsblade]

The standard address should be 192.168.1.1 and the username and password should both be "admin". hope this helps.

[Jax Myth]

Worked perfectly after I realised that I had to press "Apply Now" on my mac's system preferences once I'd changed the settings. Beautify clear explanation, thanks!

[cj72396]

In step 3 it asks for a password and username. What would those be?

[bsblade]

they are usually both admin. it should be on the bottom of your router. just try using admin for the username and password.