Print PDF
Favorite
Email
Step 4Start Stripping!
1) Very carefully score about 1/2" of the black insulation off the arms of the newly cut "y" adapter.
2) Using your wire stripper or some pliers, Pull off the 1/2" of black insulation you just scored to expose a bundle of foil wrapped wires.
3) Using your Xacto blade, slit open the foil shielding to expose the Black (headset), Metal (ground), and Red (microphone) wires.
Notice in Picture 2 how the colors of the wires match up with the headphone and mic jacks on your gaming headset
4) In Picture 3 you'll see that we've slipped the plastic housing from the 1/8" phone jack over the exposed wires so after we solder we can screw it all together.
2) Using your wire stripper or some pliers, Pull off the 1/2" of black insulation you just scored to expose a bundle of foil wrapped wires.
3) Using your Xacto blade, slit open the foil shielding to expose the Black (headset), Metal (ground), and Red (microphone) wires.
Notice in Picture 2 how the colors of the wires match up with the headphone and mic jacks on your gaming headset
4) In Picture 3 you'll see that we've slipped the plastic housing from the 1/8" phone jack over the exposed wires so after we solder we can screw it all together.
| « Previous Step | Download PDFView All Steps | Next Step » |
send me a email at sail_spiky@hotmail.com as im rarely on here