Mod Film for use in super old cameras (620 film)

Step 3: Sanding down the film

Picture of Sanding down the film
To make the 120 film fit, i started by removing the lip of the film canister, and then proceeded to sand the top down to about 1/16 and inch,using 4200 grit sandpaper. its a slow process, but you can do it in the light of day without a problem

here's a video of the sanding in case your curious:

Remove these adsRemove these ads by Signing Up

Get More Out of Instructables

Already have an Account?


PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!