Using RC car parts as remote control

Step 2 What you need

Material;
- One of the cars
- A resistor array. I used a 330Ohm SIL array fro man old floppy disc drive
- 5 LEDs, I used 5 yellow LEDs that I sourced from an old 100MBit switch
- Some wires, I got them out of an old video recorder
- Experimental PCBs, this ones I bought ;-)
- 5 bush button switches, I sourced them from an old video recorder
- 1 3V button cell battery, taken from an old pc mainboard
- 1 battery holder, also taken from the pc mainboard

Tools;
- pliers
- soldering iron
- desoldring pump
- regulated dc power supply (to power the transmitter)
- multimeter
- clips
- shap eyes
- a calm hand