Print PDF
Favorite
Email
Step 5Assembly
Having got all the parts, it was time to put them together.
Parts of the black cassette body were trimmed using the Dremel-a-like's cutting wheel (as pictured in the previous step, but removed from the wood).
The internal components were fitted, re-fitted and tweaked until everything was just right then glued into place using some Wilkinson two-part epoxy (good stuff) left over from a previous job.
With everything glued in place all that was needed was a bit of cutting on the inside of the front half of the cassette and a screwing back together.
See images and their notes
Parts of the black cassette body were trimmed using the Dremel-a-like's cutting wheel (as pictured in the previous step, but removed from the wood).
The internal components were fitted, re-fitted and tweaked until everything was just right then glued into place using some Wilkinson two-part epoxy (good stuff) left over from a previous job.
With everything glued in place all that was needed was a bit of cutting on the inside of the front half of the cassette and a screwing back together.
See images and their notes
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
