Picture of Valentine Fragrance Locket
This is a locket made from a contact lens case that can house a fragrance and or small sentimental object, a photo, a ring, a microSD, etc.
Remove these adsRemove these ads by Signing Up

Step 1: Step 1

Picture of Step 1
Parts List consist of 1. lens case.   2. scissor.   3. scotch tape.   4. small piece of red duct tape. 5. small piece of gift wrap ribbon.   6. long piece of gold rope or chain to use as a necklace.  7. fragrance 8. Small piece of  foam sponge

Step 2: Step 2

Picture of Step 2
Cut the Contact lens case in half and trim the edges.

Step 3: Step 3

Picture of Step 3
Wrap ribbon around the the top lid of the  lens case and tape the end with a tiny piece of scotch tape.

Step 4: Step 4

Picture of Step 4
Cut out 2 hearts from the piece of red duct tape to fit on top and bottom of the lens case

Step 5: Step 5

Picture of Step 5
Cut out a round piece of foam to fit in the lower half of the lens case. (Just place the lens case on top of the foam, cut around it and trim to fit.)

Step 6:

Picture of
Tie the piece of gold rope together at the ends to desired necklace length and place around the open lens case at the hinge.

Step 7:

Picture of
Now, just add some drops of fragrance to the piece of foam in the case and close the case.

Step 8: Step 8 Optional

Picture of Step 8 Optional
Options for placing sentimental objects inside the locket is only limited to size of the lens case chosen for the project. A decorative pill case can also be substituted for the lens case if a larger case is needed.  Furthermore the case can be spray painted a different color and decorated with rhinestones, glitter, beads, etc.