Introduction: Valentine Crafts - Handcraft Sterling Silver Braided Bracelet & Anklet

Picture of Valentine Crafts - Handcraft Sterling Silver Braided Bracelet & Anklet

Valentine crafts - handcraft sterling silver braided bracelet & anklet

Step 1: Prepare the Materials:

Picture of Prepare the Materials:

Step 2: Fold the 1 Meter Sky Blue Cord in Half. Tie a Double Connection Knot About 1 Cm Down From the Top

Picture of Fold the 1 Meter Sky Blue Cord in Half. Tie a Double Connection Knot About 1 Cm Down From the Top

Step 3: Start Braiding Bracelet by Using the Snake Knot.

Picture of Start Braiding Bracelet by Using the Snake Knot.

Step 4: String a Silver Butterfly Shaped Bead After You Braided It About 2 Cm Long

Picture of String a Silver Butterfly Shaped Bead After You Braided It About 2 Cm Long

If you find difficult to thread the silver bead on cord, please note to burn the ends of cord so that the 2 cords will become one, believe it or not, it’ll more convenient for you on this way.

Step 5: Tie a Double Connection Knot Again.

Picture of Tie a Double Connection Knot Again.

Step 6: Move Down the Length of Sky Blue Cord About 2 Cm and Make the Other Double Connection Knot.

Picture of Move Down the Length of Sky Blue Cord About 2 Cm and Make the Other Double Connection Knot.

Step 7: Continue Braiding Bracelet With Snake Knot. Thread the Two Sterling Silver Lotus Seed Pod Beads on Cords When Its Length Is Approx 2 Cm.

Picture of Continue Braiding Bracelet With Snake Knot. Thread the Two Sterling Silver Lotus Seed Pod Beads on Cords When Its Length Is Approx 2 Cm.

Step 8: Tie Another Double Connection Knot After Thread the Beads.

Picture of Tie Another Double Connection Knot After Thread the Beads.

Step 9: Move Down the Length of Sky Blue Cord About 2 Cm and Make Another Double Connection Knot.

Picture of Move Down the Length of Sky Blue Cord About 2 Cm and Make Another Double Connection Knot.

Step 10: Continue Braiding Bracelet With Snake Knot, and Then, Thread the Two Sterling Silver Hollow Love Heart-shaped Beads on It.

Picture of Continue Braiding Bracelet With Snake Knot, and Then, Thread the Two Sterling Silver Hollow Love Heart-shaped Beads on It.

Please note, There is a slight difference that needs you tie an overhand knot on the left cord before you thread bead on it.

Step 11: Tie One More Double Connection Knot to Hold the Beads in Place.

Picture of Tie One More Double Connection Knot to Hold the Beads in Place.

Step 12: Thread a Spring Clasp on the Cord and Tie the Last Double Connection Knot.

Picture of Thread a Spring Clasp on the Cord and Tie the Last Double Connection Knot.

Step 13: Trim the Excess Cords and Burn Their Tails, So That the Cord Will Never Be Loosen.

Picture of Trim the Excess Cords and Burn Their Tails, So That the Cord Will Never Be Loosen.

Step 14: Done It!

Picture of Done It!

Comments

About This Instructable

1,346views

34favorites

License:

More by Renee2014:Friendship bracelet patterns - friendship last foreverHandmade Red Agate and Jadeite jade "flower fairy" beaded bracelet DIY03Handcraft 925 Sterling Silver Tube Bending Unisex Braided Bracelets
Add instructable to: