Instructables

Step 6: Step Five

Picture of Step Five
DSCN0890.JPG
DSCN0892.JPG
DSCN0894.JPG
DSCN0896.JPG
DSCN0897.JPG
DSCN0899.JPG
DSCN0900.JPG
DSCN0904.JPG
DSCN0905.JPG
DSCN0906.JPG
Step Five

Now take one of the flaps and hold it up and bend at the fold . The flaps should fold in on each forming the box. Do this first so you know where each piece goes. 

Now lay it flat and turn the paper with design side up. Coat the corner flap with glue. you will glue each corner and  fold it in the same way you did when folded it together without the glue. As you glue you may want paper use a paper clip to secure the each side box while it dries or hold it in place a few minutes until it sets up.

Repeat all the way until all four corners are done. You now have a box.

For more information look at the follow the photos.

 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!