Print PDF
Favorite
Email
Step 5Putting parts together
Now its time to actually put all the parts into their new home.
Since we measured exactly, that should not be a problem.
In order to provide some power i had to build my own batteryslot.
My device needs about 4.5V so i put 3 times 1.5V AG4 LR625 377 batteries in series. In order to fix them to stay where they should, i installed a little spring which pushes them together. Soldering the specific wires to their contacts and installing the button is not a big deal.
After wiring everything up, i tested it, and then put the lid (which will hold the heart) on top. Glue again.
Since we measured exactly, that should not be a problem.
In order to provide some power i had to build my own batteryslot.
My device needs about 4.5V so i put 3 times 1.5V AG4 LR625 377 batteries in series. In order to fix them to stay where they should, i installed a little spring which pushes them together. Soldering the specific wires to their contacts and installing the button is not a big deal.
After wiring everything up, i tested it, and then put the lid (which will hold the heart) on top. Glue again.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
