Print PDF
Favorite
Email
Step 3The forestock.
Bumpus told me a needed a forestock, so I went about it,
Firstly i fixed a base in place onto the bottom of the barrel, I then took a HP ink cartridge and split both the sides off, these then fit over the base.
I then added a trigger inside the trigger guard. Using a few bits of card cut to shape.
Firstly i fixed a base in place onto the bottom of the barrel, I then took a HP ink cartridge and split both the sides off, these then fit over the base.
I then added a trigger inside the trigger guard. Using a few bits of card cut to shape.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
