Print PDF
Favorite
Email
Step 12Assembly Step 9. MOSFETs Q1,Q2,Q3
The next step is to fit the three power MOSFETs.
These must be fitted the correct way round. The metal tab should be located nearest the terminal block positions CN1 and CN2 as shown in the photo.
Fit each MOSFET one at a time and solder into place.
These must be fitted the correct way round. The metal tab should be located nearest the terminal block positions CN1 and CN2 as shown in the photo.
Fit each MOSFET one at a time and solder into place.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
