Print PDF
Favorite
Email
Step 13Assembly Step 10. Connectors CN1. CN2
Next step is the two connectors CN1 and CN2,
These are an interlocking connector so you will need to fit them togther so the keyed edge on one connector fits into the slot on the other one.
Fit to the PCB and solder in place. Make sure the connectors fit snuggly against the PCB with no gap.
These are an interlocking connector so you will need to fit them togther so the keyed edge on one connector fits into the slot on the other one.
Fit to the PCB and solder in place. Make sure the connectors fit snuggly against the PCB with no gap.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
