Print PDF
Favorite
Email
Step 15Assembly Step 12. Fit the PIC Microcontroller
With the PCB fully assembled you can now install the PIC microcontroller into the socket.
Look carefully at the PIC microcontroller package and you will see an indent in the top corner. This denotes pin 1 of the device.
Insert the PIC into the 8 pin DIP socket with the indent towards the voltage regulator IC2. See the photo for this step which illustrates this.
Look carefully at the PIC microcontroller package and you will see an indent in the top corner. This denotes pin 1 of the device.
Insert the PIC into the 8 pin DIP socket with the indent towards the voltage regulator IC2. See the photo for this step which illustrates this.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
