Print PDF
Favorite
Email
Step 16End of assembly
That completes the assembly of driver PCB
Your assembled PCB should look similar to the one in the photos here.
You can apply power to the driver PCB without any LED modules connected to the outputs. The green power-on LED1 should light whenever power is applied to the board.
Your assembled PCB should look similar to the one in the photos here.
You can apply power to the driver PCB without any LED modules connected to the outputs. The green power-on LED1 should light whenever power is applied to the board.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
