Print PDF
Favorite
Email
Step 6Mount Sensor
Mount the Sensor on the front down
tube as shown. Let a space about
3 mm from the magnet with the end
of the sensor about 1/2 way over
the center of the magnet.
Don't mount the computer bracket to
the handlebar yet, that way you see the
readout easier.
Set the computer by instruction manual
using 3333 as the wheel size and
the speed reading to KM not Miles.
You can check the pickup by rotating the
crank backwards with the kickstand up
and the bike leaning against something.
Once you are happy with the pickup you
can mount the computer to the handlebar.
tube as shown. Let a space about
3 mm from the magnet with the end
of the sensor about 1/2 way over
the center of the magnet.
Don't mount the computer bracket to
the handlebar yet, that way you see the
readout easier.
Set the computer by instruction manual
using 3333 as the wheel size and
the speed reading to KM not Miles.
You can check the pickup by rotating the
crank backwards with the kickstand up
and the bike leaning against something.
Once you are happy with the pickup you
can mount the computer to the handlebar.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
