Introduction: Very Simple Soldering Stand

Picture of Very Simple Soldering Stand

Here I show You how to make iron soldering stand using only paper clip and candle. And you can make it under 2 minutes!

Step 1: Preparing Paper Clip

Picture of Preparing Paper Clip

First You must bend paper clip like on photo, then heat lower "legs" over fire (I used lighter).

Step 2: Finishing

Picture of Finishing

When lower part of paper clip is hot (don't touch it!) push it into candle. It should be few milimeters (or more) under surface of candle. After this it should look like on the photo.
That's everything, your iron soldering stand is now ready!

PS That was my first tutorial, if You find any mistakes or have some tips, please write a comment :)

Comments

AdamR13 (author)2016-01-22

Just FYI.
Good tutorial.
However, I see a misspelling in the 2nd section.

Change:
First you must bed paperclip
to
First you must bend paperclip.

Otherwise everything looks great! nice work! The misspelling is not a big deal, the meaning is easily understood. Just thought you should know!

Good idea! Nice job!

AntekS (author)AdamR132016-01-23

Thank you, I missed it ;)

tomatoskins (author)2016-01-19

So simple, why didn't I think of this before! Thanks for sharing and welcome to instructables!

AntekS (author)tomatoskins2016-01-19

Thank You! :)

About This Instructable

287views

1favorite

License:

More by AntekS:Very simple soldering stand
Add instructable to: