Print PDF
Favorite
Email
Step 6Extended cables (and another view of both knee pads)
The last thing before installing all of this is to extend the speaker, 5way controller and iPod connector wires. I made most of the extensions about 3 feet long and I had extra length in most cases. For each I used a different type of wire to splice.
Speaker - I used USB cable - two wires and shield ground
5way controller - I used ribbon cable (you need 6 conductors)
iPod connector - I used a VGA video cable which is shielded and has enough conductors (9) to trasmit the audio, power and control signals.
Below is another view of both knee pads.
Speaker - I used USB cable - two wires and shield ground
5way controller - I used ribbon cable (you need 6 conductors)
iPod connector - I used a VGA video cable which is shielded and has enough conductors (9) to trasmit the audio, power and control signals.
Below is another view of both knee pads.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
