Print PDF
Favorite
Email
Step 3Record bowl with cuts
This variation starts with some cuts in the record to help guide the shape. The cuts here were made with a rotary tool like a Dremel.
The cuts here are lines that begin at one circle and end at another. Each cut ends 30 degrees off from where it began. So if one cut were to begin at 12 o'clock on the inner circle, it ends at 1 o'clock on the outer circle.
The cuts here are lines that begin at one circle and end at another. Each cut ends 30 degrees off from where it began. So if one cut were to begin at 12 o'clock on the inner circle, it ends at 1 o'clock on the outer circle.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
