Introduction: Vinyl Record Wall Mount Via Shoe Box

Picture of Vinyl Record Wall Mount Via Shoe Box

Mount your vinyl records on the wall with these shoe box shelves.

Step 1: What You Need

Picture of What You Need


- Box
- Tacks

Step 2: Cut Box

Picture of Cut Box

Cut the box into four pieces by cutting down the center horizontally and vertically.

Step 3:

Picture of

You should now have four similar pieces.

Stand them up and cut two thin strips of the same length out of the two standing side's centers.

Step 4:

Picture of

There should now be three flaps on each mount. Remove the two flaps facing outward, leaving a small lip at the bottom. Remove the excess corner at the front.

The mount can now be tacked to  the wall.

Hang up your vinyls and let everyone know that you still use an ancient analog technology.


About This Instructable




More by Zoasterboy:Vinyl Record Wall Mount via Shoe BoxBike Mounted Phone/Device Holder via Aluminum Can
Add instructable to: