Introduction: Violin/Guitar Clothes Hanger

Picture of Violin/Guitar Clothes Hanger

Recycling woods used in the manufacture of guitars, own design clothes hanger shaped Violin/Guitars, idea can be applies to other models and finishes.

What You'll Need:



• Plywood board 12mm thickness
• Maple wood
• Steel piper, 10mm exterior diameter and 8mm inner
• Varnish
• Stain (optional)
• Woodworking tools

You can also check out my website! www.paoson.com

Step 1: Video and Instructions

Precut Plywood board, then download DXF files for CNC and preparing machining programs. Draws knobs in maple wood and sand all pieces...

You can use the stain before or after of the first lacquer coat, use 320 grit sandpaper between coats. See the video for more information.

Youtube Video

Comments

Rongorymore (author)2015-09-06

Beautiful concept. You could also use the other half as a shelf coming off over the coat rack part. Would make for a cool illusion as well. =)

jʎɐɹ-ɾ (author)2015-08-31

Very nice result!

JulianAzz (author)2015-08-31

amazing idea, you should enter this into the shelving contest!

Thanks, I will do it!

About This Instructable

753views

12favorites

License:

Bio: My name is Suso Caamanho. I like doing all sorts of stuff related to musical instruments, woodworking, computer science, electronics... On my website you will ... More »
More by Paoson Woodwork:Omelette Flipper With Built-in HandleHow to Make an Olive Wood Cutting BoardBending Wood With a Bending Iron
Add instructable to: