Introduction: Virtually Indestructible Single-Piece Woven Paracord Belt W/ Original Weave

Picture of Virtually Indestructible Single-Piece Woven Paracord Belt W/ Original Weave

Basically the only things that could destroy are either hedge clippers or open flames.

For this project you will need:

1x 100 ft of 7-strand paracord
1x climbing carabiner

Tools:
1x Lighter
1x Straight object (pencil/drumstick/ruler)
1x Old belt (for sizing) 

Step 1: Begin

Picture of Begin

Step 1:
Match up belts and create three loops. 

Step 2: Preparing the Loops

Picture of Preparing the Loops

Step 2: 
Create three loop and make sure that they are even by tying them around a straight object. (Shown with drumstick)

Step 3: Begin Weaving


Weave as shown in video.

Step 4: Ending

Picture of Ending

End the belt by looping cord through end loops.

Step 5: Seal


Seal the end by lighting on fire and then promptly blowing out.

Enjoy your belt and please vote if you liked this Instructable!

Comments

camohat (author)2013-03-25

Vote for me please.

Johnhall14 (author)2014-02-03

Looks good, I like it. About half-way finished with one.

quahery (author)2013-05-26

looks like a good one exept your video link is broken.

camohat (author)quahery2013-05-26

Just checked it. Can you visit youtube on your computer? Go to Theboyinthehat.

About This Instructable

8,407views

58favorites

License:

More by camohat:Virtually Indestructible Single-Piece Woven Paracord Belt w/ Original WeaveMy EDC Kit
Add instructable to: