Introduction: Voice Recognition Robot "chappie"

Picture of Voice Recognition Robot "chappie"

a simple voice recognition robot made by a voice recognition robot,arduino uno r3 and l293d motor driver.

Step 1: Programme a Voice Recognition Module Via Arduino

record your voices and save them on vr module;

the module,when detects a particular word it lowers the voltage on particular output pin of module.

Step 2: Connect the Output Pins of Module to Input Pins of Arduino.

Step 3: Now Programme the Arduino

i used an arduino uno,programme it in such that if there is any drop of voltage in an input pin,arduino outputs to a corresponding output pin

Step 4: Use a L293d Motor Driver

connect the corresponding output pins to leds and l293 motor driver

Step 5: Fit the Components in the Chassis

Comments

tomatoskins (author)2016-01-05

Really cool! I love homemade robots!

PraveenC4 (author)tomatoskins2016-01-17

Thanks 'manager'

About This Instructable

871views

0favorites

More by PraveenC4:Voice Recognition Robot "chappie"
Add instructable to: