With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
share step-by-step photos with text instructions
share one or more photos in one step quickly and easily
share your how-to video
IMPORTANT I have recently dug this out of a box and tried to regulate 9v from an RC car battery, it did work, but then there was a puff of smoke and i...
Drill a hole to break the tracks and solder the two terminal blocks as shown in the picture.
Solder the jump wires in.
Solder the diode in over the break in the tracks.
Solder the voltage regulator in (bend it down so it's flat if space is an issue).
Connect the power into the input end of the board. Test between the connections at the other end and it should read the voltage the chip is set for. ...
Tag files as:
Posted:Feb 2, 2010
Playing with Voltage Regulators
Zener Diode Shunt Regulator
Kurt E. Clothier
78xx Regulators Ics
How to Get Emergency Power from a Phone Line
Portable breadboard with voltage regulator for 9V battery (and other external sources)
Build It: DIY Juice Pouch
Make the simplest adjustable power supply in 10-15 minutes!
Triple Power Supply and Charger with Digital Monitor
Dual Voltage Regulated Power Supply
Using the Pololu 5V Boost Regulator
Download our new apps for iOS and android!
PDF DownloadsAs a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.