I used the slingshot system again because it gets pretty good distance, but this time I used Katarukito's mechanism. It is an ingenious design. Don't forget to subscribe and rate!
Killer~SafeCracker made a review of the gun. You can check it out here.
-Power, I got it to shoot 140 feet. Silentassassin21 got it to shoot 235 feet.
-Very nicely designed true trigger
-Uses moderate straight, brown two-way connectors.
-barrax for his criticism
-Katarukito for the firing mechanism
-Killer~SafeCracker for the review
Step 1: Parts List
Remember: Colors vary in the world of Knex so look at the pictures if you have trouble.
-Small black/green rods: 166
-Gray/Black rods: 177
-Blue rods: 49
-Medium dark gray rods: 4
-Green/ Red rods: 1
-Black/ Gray rods: 6
-Gray, one-way connector: 4
-White, two-way connector: 3
-Dark gray, right-angle, three-way connector: 21
-Green, 135 degree, four-way connector: 4
-Half-moon, five-way connector: 132
-Brown, straight, two-way connector: 79
-Black snowflake connector: 50 (About half of these can be substituted for the blue 3D connectors.)
-Blue spacers: 6
-Multiple angle, blue/black connector sets: 4
-Y connectors: 19
-Female ball sockets: 2 (Optional, but can be substituted for gray, one-way connectors.)
Step 2: Stock
1. What you are making.
2. First layer. Build it twice.
3. Second layer. Build it twice.
4. Add second layer.
5. Third and Fourth layers. Built it twice.
6. Add third layer.
7. Add fourth layer.
8. Add fifth layer.
9. Add sixth layer.