Most people who own a Dunlop CryBaby Original wah would probably agree that all in its not only a great pedal for the money ($79) and that its a ton of fun to play around with. The only problem I have run into is that it requires a good amount of pressure to activate and deactivate something that proves difficult while doing fast switches during a song or while playing while seated.. Basically I figured an absolutely free way to fix this problem. This is my first instructable ever and I hope this helps you out!

Step 1: Stuff You Will Need

Obviously a cry baby pedal
Glue or duct tape or poster adhesive
A flashlight
Scissors
and a guitar pick

Step 2: Preparing the Pick

First cut the pick in half using the scissors.
You only need the triangular part of the pick as that will be part of the mechanism.
Then take the poster adhesive and put it on the bottom of the pick

Step 3: Attaching It

So now that you finished the pick attach it to the ON/OFF switch adhesive side down so it sticks to the switch. You might want a flashlight so you can place it accurately the finished product should look like this

Step 4: Finished Product

So now you're done so go rock out and notice how easy it is to switch from on to off... I know its so exciting! and if the pick falls off it takes less than a minute to make so its not a big deal.
So go out and have fun and comment on this and rate if you liked it!