Introduction: Walking Robot

Picture of Walking Robot

I am entering this in the 12& under division.
This is an easy to build robot. It walks only with two legs. This canot move very fast but it is really cool to play with.
Post comments and pictures.

Step 1: What You Need

Picture of What You Need

For this you will need:
1 "brain"
2 motors
4 blue rond + cross connectors
16 black round connectors
a long piece with 4 holes
a long piece with 12 holes
a long piece with 13 holes


Step 2: Step 1

Picture of Step 1

But the roud circle connecters in like the picture.

Step 3: Step 3

Picture of Step 3

Put the long 13 hole piece where the pegs stick out

Step 4: Step 4

Picture of Step 4

Put a black connector on top of a blue one. Do this on both sides.

Step 5: Step 5

Picture of Step 5

Now put a long 7 hole piece on both sides

Step 6: Step 6

Picture of Step 6

Now put the black connector on top of the blue one. Do this to both sides.

Step 7: Step 7

Picture of Step 7

Put another long 4 hole piece and put it on so it goes ove one hole.

Step 8: Step 8

Picture of Step 8

Flip it over. This is to hold the "brain". Connect it to the 13 hole piece and the "brain" 

Step 9: Programing

Program it so that motor A is the is the only one moving backwards.


Avadhut.Deshmukh (author)2011-05-13

nice one ! good work!

thank ye

About This Instructable




Bio: Live life.
More by firepup104:Chicken YakisobaHomemade Herb CheesesAltoids Tin Flashlight
Add instructable to: