Print PDF
Favorite
Email
In this instuctable I will explain how to quickly make a nice looking wall mount for Guitar hero/ rock band controllers. I like to get things off the floor whenever possible and on a lazy Sunday decided to build this rack. If you need one also I hope this helps.
Remove these ads by
Signing UpStep 1Gather materials and Tools
Materials:
1 1/8" dry wall screws
20" X8"x 3/4" MDF
Paint (optional)
For this rack I used 3/4 inch MDF scraps I had in my garage. You will need a piece at least 20" x 8" to build it the same that I did.
Tools required:
1 3/4" Hold Saw
Table saw (a jig saw, circular saw, or band saw would work also)
Drill
1/8 pilot drill bit
Philips driver bit
Cordless drill
Tape Measure
Router (optional)
1 1/8" dry wall screws
20" X8"x 3/4" MDF
Paint (optional)
For this rack I used 3/4 inch MDF scraps I had in my garage. You will need a piece at least 20" x 8" to build it the same that I did.
Tools required:
1 3/4" Hold Saw
Table saw (a jig saw, circular saw, or band saw would work also)
Drill
1/8 pilot drill bit
Philips driver bit
Cordless drill
Tape Measure
Router (optional)
| « Previous Step | Download PDFView All Steps | Next Step » |
This really looks awesome, I mean, it is in itself pure awesomeness.