Print PDF
Favorite
Email
Step 3Drill and cut your guitar holes
Take one of the 2 boards and using the attached pattern and the 1 3/4" hole saw drill 2 holes spaced evenly across the board.
Next cut from the edge of the board to the hole creating a slot to insert the guitar in.
Note that I have the Wii Gibson Style Guitars and it is likely that the dimensions will be different for other brands and styles, Just make sure that they don't hit each other when hanging, The hole you drill is not big enough for the controller to fall through and there is enough space to insert them into the holder.
Next cut from the edge of the board to the hole creating a slot to insert the guitar in.
Note that I have the Wii Gibson Style Guitars and it is likely that the dimensions will be different for other brands and styles, Just make sure that they don't hit each other when hanging, The hole you drill is not big enough for the controller to fall through and there is enough space to insert them into the holder.
GUITAR_RACK.pdf(1224x1584) 6 KB| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
