Print PDF
Favorite
Email
An easy to make hampster tunnel made from 4 small water bottles.
Materials:
4 small water bottles
Crazy Glue
Permanent Markers
Materials:
4 small water bottles
Crazy Glue
Permanent Markers
Remove these ads by
Signing UpStep 1Step 1. Cut Bottles
Cut bottoms off of bottles. Make sure you cut at the wide point on the bottom so that it has the largest opening possible.
Cut tops off bottles where it starts to curve.
Cut tops off bottles where it starts to curve.
| « Previous Step | Download PDFView All Steps | Next Step » |
7
comments
|
Add Comment
|
1
Aug 24, 2010. 9:55 AMdvnfntn
says:
DO NOT USE SUPER GLUE!!!!!!!!!!!! IT WILL KILL THE HAMSTER!!!!!!!
Reply
2
Aug 15, 2011. 8:03 AMuberdum05
says:
Cellotape?
Reply
2
Jul 9, 2009. 9:06 AMAllowance10
says:
I would try but my brothers hamster perished...
Reply
2
Jun 10, 2009. 8:16 AMbuilderdude
says:
Cool!!! ill try it
Reply
1
Feb 1, 2009. 4:44 PMreggaemon (author)
says:
Woops. Finishing the thought above ... Don't leave it in the cage.
Reply
2
Feb 1, 2009. 2:21 PMMattSwan
says:
ummm...wouldn't the hamster just eat through the plastic and maybe get sick?
Reply
1
Feb 1, 2009. 4:43 PMreggaemon (author)
says:
The interior walls are smooth enough that the hampster can't sink it's teeth in. You just need to make sure the joints between bottles are bonded smoothly. That being said, the kids use it while playing with the hampster out of the cage. We don't leave it in the cage as it would likely check
Reply
 |
Add Comment
|
