Water Bottle Hummingbird Feeder

Step 3: Cut the tubing

Picture of Cut the tubing
Take your copper tubing, and measure 6in. from the end. I made my feeder with about 2in. inside of the bottle, and about 4in. outside of the bottle. Mark the six inches , and then take your hacksaw and cut the piece.
Remove these adsRemove these ads by Signing Up
A hacksaw leaves really jagged edges. I used a pipe cutter for this step =)

Get More Out of Instructables

Already have an Account?


PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!