Print PDF
Favorite
Email
Step 3Let's put it together
-place the speakers on the underside of the playdough tops and use the hot glue gun to fasten them down centered over the hole you created in step 2
-drill a small hole through the playdough tops and feed the headphone cord through
-place the circuit board in the inside of the bottle and move the controls towards the top. When the board is placed toward the plastic outline the controls with a marker and then use your modeling knife to cut out the plastic until your board controls come through the plastic.
-drill a small hole through the playdough tops and feed the headphone cord through
-place the circuit board in the inside of the bottle and move the controls towards the top. When the board is placed toward the plastic outline the controls with a marker and then use your modeling knife to cut out the plastic until your board controls come through the plastic.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
