Print PDF
Favorite
Email
Step 4Time to start up the soldering iron
-solder the speaker leads to two of the enamel wires in the cord (use hot glue to reinforce the connection of the cord to the speaker)
-solder the battery holder leads to two of the enamel wires in the cord (use hot glue to reinforce the connection of the cord to the battery holder)
-solder the 2 speaker leads from the cord to the speaker leads on the board
-solder the 2 battery leads to the battery leads on the board
-turn on your speakers to make sure all of your soldering connections were correct and everything is working properly.
-solder the battery holder leads to two of the enamel wires in the cord (use hot glue to reinforce the connection of the cord to the battery holder)
-solder the 2 speaker leads from the cord to the speaker leads on the board
-solder the 2 battery leads to the battery leads on the board
-turn on your speakers to make sure all of your soldering connections were correct and everything is working properly.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
